Overstock

View as List Grid

Items 1-10 of 64

Page
Set Descending Direction
  1. 1020-series-cast-iron-flex-check-valve
    1020 Series - Cast Iron Flex Check Valve Product #: 1020
    The SOVAL Flex Check Valve is designed with a precision molded disc with an integral o-ring type sealing surface and container alloy steel with Nylon Reinforcement in the flexible hinge area all manufactured to with stand a long lasting performing type of valve . The 1020 Series Flex Check comes equipped with a threaded port for a pipe plug on the bottom of the valve which will allow for field installation of a backflow actuator. Slamming and water hammer with the SOVAL 1020 Series Flex Check is virtually non-existent due to its short closing travel. Learn More
  2. 1030-series-cast-iron-flanged-plug-valves-1
    1031 Series - Ductile Iron Mechanical Joint Plug Valves Product #: 1031
    The SOVAL 1031 Series Mechanical Joint Plug Valves are constructed to ASTM A536 grade 65-45-12 ductile iron. The body and bonnet are Fusion Bonded Epoxy both internally and externally. The valve is pressure rated to 200 PSI with MJ ends that meet AWWA C111 Standard. The valve comes equipped with a V-Type self-adjusting packing. The plug is fully encapsulated with EPDM Rubber which also has a round port through 12” for better flow. We offer two types of operation, Travel Nut Actuator, and Worm Gear Operator. Learn More
  3. 1036-series-cast-iron-flanged-plug-valves-2
    1036 Series - Cast Iron Wafer Silent Check Valve Product #: 1036
    The Soval 1036 Series Cast Iron Silent Wafer Check Valve has an economical and compact body design and stops water hammering in its tracks. Learn More
  4. 1037-series-cast-iron-flanged-silent-globe-check-valve
    1037 Series - Cast Iron Flanged Silent Globe Check Valve Product #: 1037
    The SOVAL 1037 Series is a flanged silent globe check valve for liquid service that offers many advantages when compared to the traditional check valves. This valve is designed to close before the pump stops to eliminate water hammer, system surges, and of course flow reversal. The valve is fusion bonded epoxy coated and comes with a ductile iron disc that is guided by a stainless steel stem allowing the valve to be installed vertical or horizontal Learn More
  5. 1040-series-cast-iron-mechanical-joint-butterfly-valve
    1040 Series - Cast Iron Mechanical Joint Butterfly Valve Product #: 1040
    Soval AWWA butterfly valves are made out of cast iron. According to AWWA C504, the section that sets standards for butterfly valves that will be used in water pipes, the valves should be bubble tight and able to shutoff completely. Flanges must be used to install AWWA butterfly valves. Learn More
  6. 1041-series-cast-iron-flanged-butterfly-valve
    1041 Series - Cast Iron Flanged Butterfly Valve Product #: 1041
    AWWA butterfly valves are made out of ductile or cast iron. According to AWWA C504, the section that sets standards for butterfly valves that will be used in water pipes, the valves should be bubble tight and able to shutoff completely. Flanges must be used to install AWWA butterfly valves. Learn More
  7. 410-series-pvc-compression-couplings
    410 Series - PVC Compression Couplings Product #: 410

    Features:

    • EPDM Rubber
    • Max pressure 150 psi @ 73F
    • Max. Temp. 140F
    Learn More
  8. 420-series-pvc-unions
    420 Series - PVC Unions Product #: 420

    Features:

    • Socket
    • Max Pressure 150 PSI at 73F
    • Max. Temp 140F
    • ANSI
    Learn More
  9. 450-series-pvc-socketed-spring-check-valves
    450 Series - PVC Socketed Spring Check Valves Product #: 450

    Features:

    • Socket
    • Max Pressure 150 PSI at 73F
    • Max. Temp 120F
    • ANSI
    Learn More
View as List Grid

Items 1-10 of 64

Page
Set Descending Direction
Loading...