Check Valves

The SOVAL Flex Check Valve is designed with a precision molded disc with an integral o-ring type sealing surface and container alloy steel with Nylon Reinforcement in the flexible hinge area all manufactured to with stand a long lasting performing type of valve . The 1020 Series Flex Check comes equipped with a threaded port for a pipe plug on the bottom of the valve which will allow for field installation of a backflow actuator. Slamming and water hammer with the SOVAL 1020 Series Flex Check is virtually non-existent due to its short closing travel. Learn More

The Soval 1036 Series Cast Iron Silent Wafer Check Valve has an economical and compact body design and stops water hammering in its tracks. Learn More

The SOVAL 1037 Series is a flanged silent globe check valve for liquid service that offers many advantages when compared to the traditional check valves. This valve is designed to close before the pump stops to eliminate water hammer, system surges, and of course flow reversal. The valve is fusion bonded epoxy coated and comes with a cast iron disc that is guided by a stainless steel brass stem allowing the valve to be installed vertical or horizontal Learn More

The SOVAL 1080 Series is a Flanged Pattern Ball Check Valve that is used to prevent back-flow allowing flow with minimum friction loss. Typically used in wastewater application or dirty media applications the 1080 series has an aluminum ball, fully encapsulated w/ EPDM Rubber. The valve is internally and externally fusion bonded epoxy painted. Learn More

Features:

• Flange x Flange
• Cast Iron Body
• Class 125
• Bolted Bonnet
• Sizes: 2" - 12"
• Max pressure 200psi

Learn More

UL / FM at 300 psi, the highest rated pressure in the industry. UL / FM Swing Check Valves – Groove x Groove (2.5” – 12” Sizes) have a full waterway design, providing maximum flow area. Offers low pressure drop, non-slam performance. High strength ductile iron construction. For horizontal or vertical installations. Two test plugs included. Fusion Bonded Epoxy Coated to AWWA C550 Standard. Learn More

The Soval ULFM 823 RCV Grooved End Riser Check Valve Series is a must have for your ULFM projects. Manufactured with convenience in mind, the Soval RCV Series features tapped boss and plugs on bottom and sides, for installation of ULFM pressure gauges and drain valves. Learn More

UL / FM at 300 psi, UL / FM Swing Check Valves – Flange x Flange (2” – 12” Sizes) are manufactured to AWWA C508 Standard, offering a Clear Waterway. Resilient Seating with EPDM rubber to bronze seat ring seal. Flanged Ends to ANSI B16.1, Class 125. Two test plugs included. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard. Certfied to NSF / ANSI 61 & 372. Learn More

Our team is thrilled to announce the launch of our newest product. After receiving final approvals from FM, we are now ready to introduce our 825 Series UL/FM Resilient Seated Check Valve to the market. Learn More