Overstock

The SOVAL Flex Check Valve is designed with a precision molded disc with an integral o-ring type sealing surface and container alloy steel with Nylon Reinforcement in the flexible hinge area all manufactured to with stand a long lasting performing type of valve . The 1020 Series Flex Check comes equipped with a threaded port for a pipe plug on the bottom of the valve which will allow for field installation of a backflow actuator. Slamming and water hammer with the SOVAL 1020 Series Flex Check is virtually non-existent due to its short closing travel. Learn More

The SOVAL 1031 Series Mechanical Joint Plug Valves are constructed to ASTM A536 grade 65-45-12 ductile iron. The body and bonnet are Fusion Bonded Epoxy both internally and externally. The valve is pressure rated to 200 PSI with MJ ends that meet AWWA C517 Standard. The valve comes equipped with a V-Type self-adjusting packing. The plug is fully encapsulated with NBR Rubber which also has a round port through 12” for better flow. We offer two types of operation, Travel Nut Actuator, and Worm Gear Operator. Learn More

The Soval 1036 Series Cast Iron Silent Wafer Check Valve has an economical and compact body design and stops water hammering in its tracks. Learn More

The SOVAL 1037 Series is a flanged silent globe check valve for liquid service that offers many advantages when compared to the traditional check valves. This valve is designed to close before the pump stops to eliminate water hammer, system surges, and of course flow reversal. The valve is fusion bonded epoxy coated and comes with a cast iron disc that is guided by a stainless steel brass stem allowing the valve to be installed vertical or horizontal Learn More

Soval AWWA butterfly valves are made out of ductile. According to AWWA C504, the section that sets standards for butterfly valves that will be used in water pipes, the valves should be bubble tight and able to shutoff completely. Learn More

AWWA butterfly valves are made out of ductile or cast iron. According to AWWA C504, the section that sets standards for butterfly valves that will be used in water pipes, the valves should be bubble tight and able to shutoff completely. Flanges must be used to install AWWA butterfly valves. Learn More

Learn More

Features:

• EPDM Rubber
• Max pressure 150 psi @ 73F
• Max. Temp. 140F

Learn More

Features:

• Socket
• Max Pressure 150 PSI at 73F
• Max. Temp 140F
• ANSI

Learn More

Features:

• Socket
• Max Pressure 150 PSI at 73F
• Max. Temp 120F
• ANSI

Learn More

Features:

• Socket
• Pressure rating 150 psi at 73F
• Max. service temperature 140F
• ANSI
• NSF Certified
• Naturally Lead Free
• Up to 18"

Learn More

Features:

• Socket
• Pressure rating 150 psi at 73F
• Max. service temperature 140F
• ANSI
• NSF Approved
• Naturally Lead Free
• Up To 18"

Learn More

Features:

• Socket
• Pressure rating 150 psi at 73F
• Max. service temperature 140F
• ANSI
• NSF Approved
• Naturally Lead Free
• Up to 18"

Learn More

Features:

• Socket
• Pressure rating 150 psi at 73F
• Max. service temperature 140F
• ANSI
• NSF Approved
• Naturally Lead Free

Learn More

Features:

• Socket
• Pressure rating 150 psi at 73F
• Max. service temperature 140F
• ANSI
• NSF Approved
• Naturally Lead Free

Learn More

Features:

• Socket
• Pressure rating 150 psi at 73F
• Max. service temperature 140F
• ANSI
• NSF Approved
• Naturally Lead Free

Learn More

Features:

• Flanged
• Pressure rating 150 psi at 73F
• Max. service temperature 140F
• ANSI
• NSF Approved
• Naturally Lead Free

Learn More

Learn More

Features

• Socket Standard / Threaded (by reqeust)
• Pressure rating 150 psi at 73F
• Max. service temperature 104F
• EPDM (Viton Optional)
• PTFE
• ANSI
• NSF Certified
• Do not use with Compressed Air or Other Gases
• Naturally Lead Free

Learn More

The Soval 511 Series - PVC Wafer Butterfly Valves are the only PVC butterfly valves you need for all your flow control projects whether it's for irrigation, plumbing, utilities or more. Learn More

Features:

• Threaded
• Heavy Duty Forged Brass
• Standard Port, Max Flow, Minimal Pressure Drop
• Quarter Turn Lever Handle
• Chrome Plated Brass Ball & Stem
• Not for Potable Water in USA
• 400 WOG

Learn More

Features:

• Threaded
• Heavy Duty Forged Brass
• Full Port
• Cast Brass
• Metal to Metal Seating Surfaces
• Not for Potable Water in USA
• 200 WOG

Learn More

Features:

• Threaded
• Forged Brass
• Swing Type
• Not for Potable Water in USA
• 200 WOG
• Temperature Range: -20F to 150F
• Positive one way flow for Plumbing and Irrigation with minimal pressure loss

Learn More

Features:

• Threaded
• Forged Brass
• Spring Loaded for Fast Seating Action
• Not for Potable Water in USA
• 200 WOG
• Temperature Range: 10F to 210F

Learn More

Features:

• Lead Free Forged Brass
• Blow Out Proof Stem
• Threaded Ends Comply with ANSI B2.1
• 600 WOG

Learn More

Features:

• Size: 1/4" - 2"
• Pressure Rating: 300 WOG | Non-Shock
• Temperature Rating: 180°F
• Lead Free

Learn More

Features:

• Sizes: 1/4" - 4"
• Pressure Rating: 200 WOG | Non-Shock
• Temperature Rating: 180°F
• Lead Free
• Pressure Rating for Steam: 125 PSI | 320°F
• FIP x FIP

Learn More

Features:

• Sizes: Sizes: 1/2" - 4"
• Pressure Rating: 200 WOG | Non-Shock
• Temperature Rating: 180°F
• Lead Free
• S x S

Learn More

Features:

• Sizes: 1/2" - 4"
• Pressure Rating: 200 PSI | Non-Shock
• Temperature Rating: 180°F
• Lead Free
• FIP x FIP

Learn More

Features:

• Sizes: 1/4" - 3"
• Pressure Rating: 300 CWP | 150 WSP
• Temperature Rating: 180°F
• Lead Free
• FIP x FIP

Learn More

Features:

• Sizes: 1/2" - 3/4"
• Pressure Rating: 125 PSI | Non-Shock
• Temperature Rating: 180°F
• Lead Free

Learn More

Learn More

UL / FM / AWWA resilient seated gate valves (non-rising stem) are manufactured in accordance with AWWA C515-09 Standard and are Certified to NSF / ANSI 61 & 372. The UL/FM, AWWA NRS Flange x Flange Valve’s body, bonnet, and wedge are of high strength ductile-iron. The wedge is encapsulated with EPDM rubber. Stainless steel stem and bolting are standard. Flanges to ANSI B16.1, Class 125. Valves are fusion bonded epoxy coated interior and exterior to AWWA C550 Standard. UL / FM @ 300 psi. Available with Hand Wheel or Operating Nut. Learn More

The SOVAL 802IP UL / FM / AWWA Resilient Seated Post Indicator Gate Valves (non-rising stem) are manufactured in accordance with AWWA C515-09 Standard and are Certified to NSF / ANSI 61 & 372. The UL/FM, AWWA NRS Flange x Flange Valve’s body, bonnet, and wedge are of high strength ductile-iron. The wedge is encapsulated with EPDM rubber. Stainless steel stem and bolting are standard. Flanges to ANSI B16.1, Class 125. Valves are fusion bonded epoxy coated interior and exterior to AWWA C550 Standard. UL / FM @ 300 psi. Available with Operating Nut. Learn More

The Soval 807 Series Ductile Iron UL/FM Mechanical Joint NRS Gate Valve is designed to handle the rigorous city demands for fire protection, waterworks, sewage, flow control systems, irrigation and more. It comes with a long lasting fusion epoxy coating in and out ensure optimal performance well into the far future of your project. Rated up to 300 psi working water pressure with temps ranging from 42F to 180F. Comes in sizes 3"-12". Learn More

The SOVAL UL / FM Water Flow Detector is a Vane Type design used in fire protection piping systems.  The SOVAL 811 Series is designed for both indoor and outdoor use, with a temperature range of 0° C to 60° C.  Learn More

The SOVAL 836 Series offers a short face to face dimension and compact design allowing installation and service between tight spaces. This valve is has a single door design and is spring assisted for better dynamic behavior. It is soft seated for perfect tightness even at low differential pressure. This valve has very little obstruction for the media to pass. Learn More

The SOVAL 837 Series offers a short face to face dimension and compact design allowing installation and service between tight spaces. This valve is UL Listed and is spring assisted for better dynamic behavior. It is soft seated for perfect tightness even at low differential pressure. Learn More

The SOVAL 840 Series Butterfly Valve is wafer style, epoxy coated with a Cast Iron Body and Ductile Iron Disc. The 840 Series butterfly valve is used to control liquid or gas flow through pipes. The rotating disc is controlled by a 10 position lever and locking system to easily throttle the flow. Learn More

The SOVAL 846 Series Butterfly Valve is a Wafer Style, Epoxy Coated with a Cast Iron Body and Stainless Steel Disc. The 846 Series butterfly valve is used to control liquid or gas flow through pipes. The rotating disc is controlled by a gear driving that is operated by a handwheel which allows to easily throttle the flow of media. Learn More

The SOVAL 848 Series UL/FM Wafer Style Butterfly Valves has a Vulcanized Disc design that provides bubble-tight shut-off every time. Low torque operation – high cycle life. The 848 Series comes equipped with a gear drive operator which Includes a built-in Supervisory (Tamper) Switch. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard. Learn More

The Soval 850 Series Cast Iron Flanged Wye Strainer is the perfect choice to remove those unwanted solids from your flow control uses. Clean out that debris with an easy open cover without having to shut off your flow for some quick maintenance. Install our Y strainer horizontally or vertically. Learn More

Features:

• Sizes: 2-1/2" - 12"
• Certified to NSF / ANSI 61 & 372
• Flanges ANSI B16.1 Glass 125
• Working Temp 14° F - 250° F

Learn More

SOVAL 870 Series Forged Steel Threaded Companion Flanges contain a female NPT thread center for connection to males threaded pipe. They meet ANSI B16.5 flange pattern's, Class 150, and are rated at 150psi. Learn More

SOVAL 871 Series Forged Steel Threaded Companion Flanges contain a reduced female NPT thread center for connection to males threaded pipe. They meet ANSI B16.5 flange pattern's, Class 150, and are rated at 150psi Learn More

SOVAL 880 Series Forged Steel Blind Flanges are made to cap off a line, a blind flange has no bore or inner diameter. They meet ANSI Class 125 and are rated at 150psi. Learn More

Features:

• Ductile Iron
• Epoxy Coated
• Max Pressure 250 PSI
• Sizes: 2" - 12"

Learn More

Features:

• Ductile Iron
• Epoxy Coated
• Max Pressure 250 PSI
• Sizes" 2" - 10"

Learn More

Soval Posi-Seal Gaskets are 1/8" full faced made from an SBR (Styrene-Butadiene) material that has a maximum temperature of 150 ̊F for water and 125 ̊F for air applications. Posi-Seal Gaskets have been designed with a micro-groove design which provides a watertight seal for all flanged joints. The Posi-Seal Gaskets are all marked with our trademark (+Seal), ANSI 125/150, the Size, the Manufacturer (Soval) and the Country of Origin). Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

test short desc Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

test short Learn More